4A0-100 Nokia IP Networks and Services Fundamentals is formerly known as Nokia Scalable IP Networks which credit towards Nokia Network Routing Specialist I (NRS I) Certification. PassQuestion new updated 4A0-100 Exam Questions to help you clear the NRS I Recertification 4A0-100 exam in the shortest possible time. With the help of enriched latest 4A0-100 Exam Questions from PassQuestion you can achieve your desire result regarding the Nokia IP Networks and Services Fundamentals Exam.

4A0-100 Exam Overview - Nokia IP Networks and Services Fundamentals

The Nokia IP Networks and Services Fundamentals is the starting point for the Service Routing Certification program. It is designed for students with limited knowledge of IP and Ethernet technologies. Upon successful completion of this course, students will be familiar with the basics of the TCP/IP layered model, Ethernet, Internet addressing and packet forwarding, routing protocols, MPLS tunneling, and Virtual Private Network (VPN) services.

4A0-100 Exam Information

Exam Name: Nokia IP Networks and Services Fundamentals (formerly known as Nokia Scalable IP Networks)
Exam Number: 4A0-100
Credit Towards Certifications: Nokia Network Routing Specialist I (NRS I)
Exam Duration: 75 Minutes
Exam Appointment Duration: 120 minutes. This is the exam duration plus a 45 minute tutorial on computer-based examinations.
Number of Questions: 40 (80% is required to pass)
Language: English

Exam Topics for 4A0-100 Exam

Candidates must know the exam topics before they start of preparation. Because It will really help them in hitting the core. 
Describe the use of 750 SERVICE ROUTER (SR) and 450 EARTHNET SERVICE Switch 
Describe the IP forwarding process 
Explain the purpose and basic feature of BGP 
Explain the basic operation of the Transmission Control Protocol 
Configure static routes and dynamic routing in a single area of OSPF network

View Online Nokia IP Networks and Services Fundamentals 4A0-100 Free Questions

1.You are configuring your Nokia 7750SR Service Router from the Command Line Interface (CLI), and after entering a lengthy command, wish to return directly to the ROOT context.
Which control command allows you to do this quickly?
A. Ctrl-z
B. Ctrl-c
C. Esc
D. Shift-Page Down
Answer: A

2.Which of the following best describes a repeater?
A. A passive device simply used to connect two or more cables. Does not generate or amplify any signals.
B. A device that receives and retransmits a signal out its ports, but does not do any Layer 2 analysis of the data.
C. A device that receives a signal and based on the Layer 2 destination address, makes a decision on which ports the signal should be retransmitted.
D. A device that receives a signal and based on the Layer 3 destination address, makes a decision on which ports the signal should be retransmitted.
Answer: B

3.How do protocols such as ATM and Frame-Relay support differentiating multiple customers or traffic types on the same physical wire?
A. ATM and Frame-Relay are circuit switched protocols and use Virtual Circuits to create logical separation of traffic.
B. ATM and Frame-Relay are point-to-point protocols and do not support different customers or traffic type on the same physical wire.
C. ATM and Frame-Relay are circuit switched protocols and use VLAN's to create logical separation of traffic.
D. ATM and Frame-Relay are circuit switched protocols and use IP Header information to create logical separation of traffic.
Answer: A

4.Which of the following is a feature of Layer 3?
A. Provides an universal addressing scheme
B. Ensures data is delivered across the Layer 2 network.
C. Provides reliable data transfers.
D. Provides a physical interface to the network.
Answer: A

5.The 201.148.26.0/24 network is subnetted using a /26 mask.
How many subnets and host addresses will you obtain with this mask?
A. 4 subnets, 64 hosts
B. 64 subnets, 4 hosts
C. 4 subnets, 62 hosts
D. 64 subnets, 2 hosts
E. 6 subnets, 30 hosts
Answer: C

6.What kind of information can a Dynamic Host Configuration Protocol (DHCP) client receive?
A. Details of the configuration settings of each router on the network.
B. A list of other DHCP clients.
C. IP addresses and their lease times.
D. Server time information
Answer: C