PassQuestion new updated DELL EMC DES-1721 Practice Test Questions which save your valuable time and energy and allow you to easily and smoothly pass the Specialist - Implementation Engineer SC Series Exam in the first try.Selecting PassQuestion DELL EMC DES-1721 Practice Test Questions will increase your confidence of passing the exam and will effectively help you pass the DES-1721 exam. PassQuestion can provide you with a very high accuracy of exam preparation.

DES-1721 Exam Overview - Specialist - Implementation Engineer SC Series Exam 

DES-1721 exam is a qualifying exam for the Specialist - Implementation Engineer, SC Series track. This exam focuses on the knowledge and activities involved in installing, initializing, configuring and testing the hardware and software of the Dell EMC SC Series Storage products. There are totally 60 questions in the real test and you need to answer all questions in 90 minutes,the passing score is 63.

DES-1721 Exam Topics Covered In Real Test

Storage Center Fundamentals (5%)
Storage Center Hardware (15%)
Storage Center Cabling (19%)
Storage Center Deployment and Initial Configuration (3%)
Initial SAN HBA and Switch Configurations (11%)
Storage Center Basic Administration (15%)
Dell Storage Manager (DSM) Installation and Configuration (9%)
Dell Storage Manager (DSM) Administration (6%)
Storage Center Data Progression, Data Instant Replay, and Remote Instant Replay Management (17%)

View DES-1721 Free Questions Comes From PassQuestion Full DELL EMC DES-1721 Exam Questions 

1.You are installing a new SC9000.
Which procedure should be used to install and configure the system?
A. Connect through the iDRAC port
B. Connect through a null modem cable to the serial port
C. Connect through the Dell Storage Manager Client
D. Connect through the supplied proprietary serial cable to the serial port
Answer: D

2.An administrator wants to configure an SC Series array to use Virtual Port Mode.
What is a requirement to accomplish this task?
A. NPIV must be disabled on Fibre Channel switches
B. I/O Controller cards must use a single-ID firmware version
C. Fibre Channel switches must use a switched fabric topology
D. Activation license must be purchased and installed
Answer: D

3.What are the possible methods to upgrade the firmware on a Brocade switch?
A. FTP, SFTP, and Web Tools
B. USB, FTP, and SFTP
C. USB, FTP, and Web Tools
D. USB, SFTP, and Web Tools
Answer: C

4.A customer is running the Dell Storage Manager (DSM) Suite as a software stack on Microsoft Windows. To reduce the Microsoft licensing costs, the customer wants to switch to the DSM Virtual Appliance.
Which recommended deployment should the customer use?
A. Configure as a Primary Data Collector
B. Configure as a Remote Data Collector
C. Migrate the DSM database manually
D. Migrate from the existing Data Collector
Answer: D

5.Which operating system runs the Dell Storage Manager (DSM) as a virtual appliance?
A. CentOS 7
B. Windows Server 2012 R2 
C. VMware
D. Windows Server 2010 R2
Answer: C

6.Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts for switches that incorrectly negotiate speed and duplex?
A. Use a separate supernet or switches for iSCSI trafficGigabit full duplex hard set for all iSCSI portsEnsure switches used for iSCSI are of a blocking design
B. Use a separate VLAN or switches for iSCSI trafficAuto-negotiate for all switchesEnsure switches used for iSCSI are of a non-blocking design
C. Use a separate VLAN or switches for iSCSI trafficGigabit full duplex hard set for all iSCSI portsEnsure switches used for iSCSI are of a non-blocking design
D. Use a separate subnet or switches for iSCSI trafficAuto-negotiate for all switchesEnsure switches used for iSCSI are of a blocking design
Answer: C